[原创]发一个简单的小包优先规则，希望有200台以上网吧的朋友运用试试效果！

anian

把常用游戏的目标连接端口来做一个标记，然后优先，这个办法不错，经过测试效果也可以，不过 chain是 forward比prerouting效果差很多，如果加在forward里还不如不优化，不知道为什么，只是实践的结果。

platinum

PREROUTING 是首先到达 ROS 的数据包
FORWARD 是穿过 ROS 的数据包

zooyo

原帖由 anian 于 2006-12-10 23:04 发表
把常用游戏的目标连接端口来做一个标记，然后优先，这个办法不错，经过测试效果也可以，不过 chain是 forward比prerouting效果差很多，如果加在forward里还不如不优化，不知道为什么，只是实践的结果。

发发脚本来看看！

anian

游戏端口只设置了几个

/ ip firewall mangle
add chain=forward protocol=tcp tcp-flags=syn action=change-mss new-mss=1452 \
    comment="改变MSS" disabled=no
add chain=prerouting src-address=192.168.0.0/23 tos=min-delay \
    action=mark-packet new-packet-mark=LEVEL-1 passthrough=yes \
    comment="上行数据标记" disabled=no
add chain=prerouting src-address=192.168.0.0/23 tos=max-reliability \
    action=mark-packet new-packet-mark=LEVEL-2 passthrough=yes comment="" \
    disabled=no
add chain=prerouting src-address=192.168.0.0/23 tos=normal action=mark-packet \
    new-packet-mark=LEVEL-3 passthrough=yes comment="" disabled=no
add chain=prerouting src-address=192.168.0.0/23 packet-size=0-768 \
    action=mark-packet new-packet-mark=LEVEL-2 passthrough=yes \
    comment="上行中小包数据" disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=tcp dst-port=3724 \
    action=mark-packet new-packet-mark=LEVEL-1 passthrough=yes \
    comment="魔兽世界" disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=tcp \
    dst-port=8086-8087 action=mark-packet new-packet-mark=LEVEL-1 \
    passthrough=yes comment="" disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=tcp \
    dst-port=9090-9091 action=mark-packet new-packet-mark=LEVEL-1 \
    passthrough=yes comment="" disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=tcp dst-port=9100 \
    action=mark-packet new-packet-mark=LEVEL-1 passthrough=yes comment="" \
    disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=udp dst-port=8000 \
    action=mark-packet new-packet-mark=LEVEL-1 passthrough=yes comment="QQ" \
    disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=tcp dst-port=8000 \
    action=mark-packet new-packet-mark=LEVEL-1 passthrough=yes comment="" \
    disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=tcp dst-port=39311 \
    action=mark-packet new-packet-mark=LEVEL-1 passthrough=yes \
    comment="跑跑卡丁车" disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=udp dst-port=39311 \
    action=mark-packet new-packet-mark=LEVEL-1 passthrough=yes comment="" \
    disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=tcp dst-port=36567 \
    action=mark-packet new-packet-mark=LEVEL-1 passthrough=yes comment="" \
    disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=udp dst-port=36567 \
    action=mark-packet new-packet-mark=LEVEL-1 passthrough=yes comment="" \
    disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=tcp dst-port=11527 \
    action=mark-packet new-packet-mark=LEVEL-1 passthrough=yes comment="" \
    disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=udp dst-port=11527 \
    action=mark-packet new-packet-mark=LEVEL-1 passthrough=yes comment="" \
    disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=tcp dst-port=11107 \
    action=mark-packet new-packet-mark=LEVEL-1 passthrough=yes comment="" \
    disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=udp dst-port=11107 \
    action=mark-packet new-packet-mark=LEVEL-1 passthrough=yes comment="" \
    disabled=no
add chain=prerouting src-address=192.168.0.0/23 protocol=tcp \
    dst-port=9066-9070 action=mark-packet new-packet-mark=LEVEL-1 \
    passthrough=yes comment="大航海时代" disabled=no



/ queue tree
add name="优先级-上行" parent=global-out packet-mark="" limit-at=0 \
    queue=default priority=3 max-limit=0 burst-limit=0 burst-threshold=0 \
    burst-time=0s disabled=no
add name="优先通过的数据包" parent=优先级-上行 packet-mark="" limit-at=0 \
    queue=default priority=3 max-limit=0 burst-limit=0 burst-threshold=0 \
    burst-time=0s disabled=no
add name="第一级别" parent=优先通过的数据包 packet-mark=LEVEL-1 limit-at=0 \
    queue=default priority=3 max-limit=0 burst-limit=0 burst-threshold=0 \
    burst-time=0s disabled=no
add name="中等优先通过的数据包" parent=优先级-上行 packet-mark="" limit-at=0 \
    queue=default priority=6 max-limit=0 burst-limit=0 burst-threshold=0 \
    burst-time=0s disabled=no
add name="第二级别" parent=中等优先通过的数据包 packet-mark=LEVEL-2 limit-at=0 \
    queue=default priority=6 max-limit=0 burst-limit=0 burst-threshold=0 \
    burst-time=0s disabled=no
add name="最后通过的数据包" parent=优先级-上行 packet-mark="" limit-at=0 \
    queue=default priority=8 max-limit=0 burst-limit=0 burst-threshold=0 \
    burst-time=0s disabled=no
add name="第三级别" parent=最后通过的数据包 packet-mark=LEVEL-3 limit-at=0 \
    queue=default priority=8 max-limit=0 burst-limit=0 burst-threshold=0 \
    burst-time=0s disabled=no

lxma1024

好好学习一下

8098269

为什么说最小延迟包为上行数据包呢？

hwwy2002

一直在用小包优先!没发现什么问题!

fangfageng

顶下看过了

lulinjan

只给0-256的优先会不会更好？分三个不是处理更麻烦吗？

minsyc

试试试试