Junos安装不成功--例子。。

cloudq

ata2 at port 0x170-0x177,0x376 irq 15 on isa0atkbdc0:  at port 0x60,0x64 on isa0atkbd0:  flags 0x1 irq 1 on atkbdc0psm0:  irq 12 on atkbdc0psm0: model 4D+ Mouse, device ID 8vga0:  at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0sc0:  at flags 0x100 on isa0sc0: VGA sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0sio0: type 16550A, consolesio1 at port 0x2f8-0x2ff irq 3 on isa0sio1: type 16550Afxp0: Ethernet address 00:08:c7:43:3c:03fxp1: Ethernet address 08:00:09:dc:16:06DEVFS: ready to runad0: 1549MB  [3148/16/63] at ata0-master using WDMA2Mounting root from cd9660:/dev/md0cDisabling watchdog=================== Bootstrap installer starting ===================Initialized the environmentRouting engine model is OliveSourcing /sbin/OliveDiscovered that flash disk =  , hard disk = ad0Disk to install is wd0 Setting ospackage=jboot-6.0R1.3, configpackage=configs-6.0R1.3.tgzSetting packlist=jbundle-6.0R1.3-export.tgzSetting isupgrade=jboot-6.0R1.3Packages and configurations copied to /tmpCleaning up wd0...WARNING: Not 6.X style partitioning, need to repartition diskPartitioning wd0...10+0 records in10+0 records out5120 bytes transferred in 0.005399 secs (948326 bytes/sec)******* Working on device /dev/wd0 *******fdisk: invalid fdisk partition table foundfdisk: WARNING: adjusting start offset of partition 1    from 1 to 63, to fall on a head boundaryfdisk: WARNING: adjusting size of partition 1 from 3173184 to 3173121    to end on a cylinder boundaryCould not read disklabel for wd0Installing disk label on wd0Running newfs on wd0s1a...Warning: 3612 sector(s) in last cylinder unallocated/dev/wd0s1a:        225764 sectors in 56 cylinders of 1 tracks, 4096 sectors        110.2MB in 4 cyl groups (16 c/g, 32.00MB/g, 6912 i/g)super-block backups (for fsck -b #) at: 32, 65568, 131104, 196640Running newfs on wd0s1e...Warning: 3588 sector(s) in last cylinder unallocated/dev/wd0s1e:        25084 sectors in 7 cylinders of 1 tracks, 4096 sectors        12.2MB in 1 cyl groups (16 c/g, 32.00MB/g, 3136 i/g)super-block backups (for fsck -b #) at: 32Running newfs on wd0s1f...Warning: 928 sector(s) in last cylinder unallocated/dev/wd0s1f:        2128992 sectors in 520 cylinders of 1 tracks, 4096 sectors        1039.5MB in 33 cyl groups (16 c/g, 32.00MB/g, 7872 i/g)super-block backups (for fsck -b #) at: 32, 65568, 131104, 196640, 262176, 327712, 393248, 458784, 524320, 589856, 655392, 720928, 786464, 852000, 917536, 983072, 1048608, 1114144, 1179680, 1245216, 1310752, 1376288, 1441824, 1507360, 1572896, 1638432, 1703968, 1769504, 1835040, 1900576, 1966112, 2031648, 2097184Installing JUNOS on wd0...Making root filesystem...Adding jbase...Mounted jbase on /mnt/packages/mnt/jbase (/dev/vn0)Adding jbundle-6.0R1.3-export.tgz...Requested space: 156160056 bytes, free space: 932549632 bytes in /var/tmp/instmp.gc3XOBRunning requirements file first for jbundle-6.0R1.3-export..Running pre-install for jbundle-6.0R1.3-export..extract: Package name is jbundle-6.0R1.3-exportextract: CWD to .Running post-install for jbundle-6.0R1.3-export..Verified MD5 checksum of jbase-6.0R1.3.tgzVerified MD5 checksum of jboot-6.0R1.3Verified MD5 checksum of jdocs-6.0R1.3.tgzVerified MD5 checksum of jkernel-6.0R1.3.tgzVerified MD5 checksum of jpfe-6.0R1.3.tgzVerified MD5 checksum of jroute-6.0R1.3.tgzAdding jkernel...Adding jpfe...Adding jdocs...Adding jroute...Restoring backed up configurations...Unmounted /mnt/packages/mnt/jbase24: TerminatedWaiting (max 60 seconds) for system process `bufdaemon' to stop...stoppedWaiting (max 60 seconds) for system process `syncer' to stop...stoppedsyncing disks... doneUptime: 2m10sata0: Spinning down devices. Please wait...Rebooting...Console: serial portBIOS drive C: is disk0BIOS 639kB/261120kB available memoryFreeBSD/i386 bootstrap loader, Revision 0.8(builder@cecrops.juniper.net, Thu Jul 24 02:09:25 GMT 2003)|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/kernel text=0x33b247 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-data=0x273d8+0x49c88 \|/-\|/-\|/-\|/-\|/-\syms=[0x4+0x3bb90|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+0x4+0x46cb7-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|]                    Loader Quick Help                     ----------------- The boot order is PCMCIA or floppy -> Flash -> Disk -> Lan -> back to PCMCIA or floppy. Typing reboot from the command prompt will cycle through the boot devices. On some models, you can set the next boot device using the nextboot command: nextboot compact-flash | diskFor more information, use the help command: help   Hit [Enter] to boot immediately, or space bar for command prompt.Booting [kernel] in 9 seconds... Booting [kernel] in 8 seconds... Booting [kernel] in 7 seconds... Booting [kernel] in 6 seconds... Booting [kernel] in 5 seconds... Booting [kernel] in 4 seconds... Booting [kernel] in 3 seconds... Booting [kernel] in 2 seconds... Booting [kernel] in 1 second... Booting [kernel]...               /-\|/-\|Copyright ?1996-2001, Juniper Networks, Inc.All rights reserved.Copyright ?1992-2001 The FreeBSD Project.Copyright ?1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994        The Regents of the University of California. All rights reserved.JUNOS 6.0R1.3 #0: 2003-07-24 02:20:37 UTC    builder@cecrops.juniper.net:/build/cecrops-d/6.0R1.3/obj-i386/sys/compile/JUNIPERTimecounter "i8254"  frequency 1193182 HzTimecounter "TSC"  frequency 331706565 HzCPU: Pentium II/Pentium II Xeon/Celeron (331.71-MHz 686-class CPU)  Origin = "GenuineIntel"  Id = 0x660  Stepping = 0  Features=0x183f9ffreal memory  = 268435456 (262144K bytes)sio0: gdb debugging portavail memory = 255840256 (249844K bytes)Olive CPUPreloaded elf kernel "kernel" at 0xc0531000.DEVFS: ready for devicesPentium Pro MTRR support enabledmd0: Malloc disknpx0:  on motherboardnpx0: INT 16 interfacepcib0:  on motherboardpci0:  on pcib0pcib1:  at device 1.0 on pci0pci1:  on pcib1pci1:  at 0.0 irq 11fxp0:  port 0x2000-0x201f mem 0x40100000-0x401fffff,0x40300000-0x40300fff irq 11 at device 10.0 on pci0fxp1:  port 0x2020-0x203f mem 0x40200000-0x402fffff,0x40400000-0x40400fff irq 11 at device 14.0 on pci0isab0:  at device 20.0 on pci0isa0:  on isab0atapci0:  port 0x2060-0x206f at device 20.1 on pci0ata0: at 0x1f0 irq 14 on atapci0pci0:  at 20.2 irq 11smb0:  port 0xfc00-0xfc0f at device 20.3 on pci0fdc0:  at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0ata2 at port 0x170-0x177,0x376 irq 15 on isa0atkbdc0:  at port 0x60,0x64 on isa0atkbd0:  flags 0x1 irq 1 on atkbdc0device_probe_and_attach: atkbd0 attach returned 6psm0:  irq 12 on atkbdc0psm0: model 4D+ Mouse, device ID 8vga0:  at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0sc0:  at flags 0x100 on isa0sc0: VGA sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0sio0: type 16550A, consolesio1: configured irq 5 not in bitmap of probed irqs 0sio2 at port 0x2f8-0x2ff irq 3 on isa0sio2: type 16550Asio3: configured irq 7 not in bitmap of probed irqs 0fxp0: Ethernet address 00:08:c7:43:3c:03fxp1: Ethernet address 08:00:09:dc:16:06DEVFS: ready to runad0: 1549MB  [3148/16/63] at ata0-master using WDMA2Mounting root from ufs:/dev/ad0s1aMounted jbase package on /dev/vn0...Mounted jkernel package on /dev/vn1...Mounted jpfe package on /dev/vn2...Mounted jdocs package on /dev/vn3...Mounted jroute package on /dev/vn4...swapon: adding /dev/ad0s1b as swap deviceAutomatic reboot in progress.../dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1a: clean, 82937 free /dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1e: clean, 12116 free (49 frags, 10361 blocks, 0.0% fragmentation)(20 frags, 1512 blocks, 0.2% fragmentation)(49 frags, 10361 blocks, 0.0% fragmentation)/dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1f: clean, 955046 free (158 frags, 119361 blocks, 0.0% fragmentation)tunefs: soft updates setmgd: error: Cannot stat configuration file: /config/juniper.confWarning: Commit failed, activating partial configuration.Warning: Edit the router configuration to fix these errors.cp: /var/db/juniper.db: No such file or directorySetting initial options:  debugger_on_panic=NO debugger_on_break=NO.Doing initial network setup: hostname.Initial interface configuration:additional daemons: syslogd.Additional routing options:.Doing additional network setup:.Starting final network daemons:.setting ldconfig path: /usr/libstarting standard daemons: cron.Initial rc.i386 initialization:.rc.i386 configuring syscons:.Local package initialization:.starting local daemons:.Wed Aug 11 21:56:26 GMT 2004 Aug 11 21:56:26 Amnesiac (ttyd0)login: Aug 11 21:56:32   nasd[1983]: NASD_CONFIG_GET_LAST_MODIFIED_FAILED: Unable to determine last modified time of JUNOS  configuration database: Could not stat configuration database: No such file or directory Aug 11 21:56:32   alarmd[1974]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:32   alarmd[1974]: can't open ddl 'Could not open configuration database'Aug 11 21:56:32   dfwd[1986]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:33   nasd[1983]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:33   nasd[1983]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database: Could not open configuration database Aug 11 21:56:33   dfwd[1986]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:33   rmopd[1982]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:33   snmpd[1978]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:34   snmpd[1978]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database         Could not open configuration database Aug 11 21:56:34   snmpd[1978]: SNMPD_CONFIG_ERROR: Configuration database has errorsAug 11 21:56:34   pfed: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:34   rmopd[1982]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database         Could not open configuration database Aug 11 21:56:34   spd[1988]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:34   spd[1988]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database: Could not open configuration database Aug 11 21:56:34   snmpd[1978]: SNMPD_TRAP_COLD_START: trap_generate_cold: SNMP trap: cold start Aug 11 21:56:34   dcd[2116]: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryAug 11 21:56:34   dcd[2116]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:34   dcd[2116]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database: Could not open configuration database Aug 11 21:56:36   chassisd[1973]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:36   spd[1988]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:36   spd[1988]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database: Could not open configuration database Aug 11 21:56:37   chassisd[1973]: CHASD_DDL_ACCESS_ERROR: can't open ddl Could not open configuration database Aug 11 21:56:37   chassisd[1973]: CHASSISD_CONFIG_INIT_ERROR: Problems with configuration file '/var/etc/chassisd.conf'; using defaults Aug 11 21:56:37   lmpd[2128]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:38   /usr/sbin/sampled[2124]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:38   cosd[2126]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:38   lmpd[2128]: LMPD_PARSE_ERROR: [edit protocols link-management]   Configuration database open failure: Could not open configuration database  Aug 11 21:56:38   /usr/sbin/sampled[2124]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Aug 11 21:56:38   fsad[2130]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:38   cosd[2126]: COSD_DDL_FAILED: ddl open failed: error: Could not open configuration database, errno: No such file or directory Aug 11 21:56:38   dfwd[1986]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:38   fsad[2130]: FSAD_CONFIG_ERROR: Reason:   'Opening configuration database'     Could not open configuration database  Aug 11 21:56:38   /usr/sbin/sampled[2124]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:38   /usr/sbin/sampled[2124]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Aug 11 21:56:38   mib2d[2120]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:39   mib2d[2120]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database         Could not open configuration database Aug 11 21:56:39   mib2d[2120]: MIB2D_CONFIG_CHECK_FAILED: main: configuration database has errorsAug 11 21:56:39   /usr/sbin/sampled[2124]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:39   /usr/sbin/sampled[2124]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Aug 11 21:56:40   rpd[2121]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Configuration database open failure: Could not open configuration database Aug 11 21:56:42   dcd[2132]: DCD_STAT_ERROR: stat() failed on /vAmnesiac (ttyd0)login: Aug 11 21:56:42   dcd[2132]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:42 Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Aug 11 21:56:43   lmpd[2135]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAmnesiac (ttyd0)login: Amnesiac (ttyd0)login: Aug 11 21:56:43   dfwd[2138]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:43   cosd[2137]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:44   cosd[2137]: COSD_DDL_FAILED: ddl open failed: error: Could not open configuration database, errno: No such file or directory Aug 11 21:56:44   dfwd[2138]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:44   dfwd[2138]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:44   /usr/sbin/sampled[2139]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:44   /usr/sbin/sampled[2139]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Aug 11 21:56:44   /usr/sbin/sampled[2139]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:44   /usr/sbin/sampled[2139]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Aug 11 21:56:44   /usr/sbin/sampled[2139]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:44   /usr/sbin/sampled[2139]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Aug 11 21:56:46   rpd[2140]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Configuration database open failure: Could not open configuration database Aug 11 21:56:47   init: ntp is thrashing, not restartedAug 11 21:56:47   dcd[2142]: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryAmnesiac (ttyd0)login: Aug 11 21:56:47   dcd[2142]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:47   dcd[2142]: UI_CONFIGURATION_ERROR: Process: , path:  configure Entering configuration modeThe configuration has been changed but not committed[edit]root# commit commit complete[edit]root# ls      ^unknown command.[edit]root# show interfaces brief                      ^invalid interface type in 'brief' at 'brief'[edit]root# e   set om          ^syntax error.root# set om          interfaces fx0   p0 ?Possible completions:  accounting-profile   Accounting profile name+ apply-groups         Groups from which to inherit configuration data  description          Text description of interface  disable              Disable this interface  gratuitous-arp-reply  Enable gratuitous ARP reply> hold-time            Hold time for link up and link down  link-mode            Link operational mode  mac                  Hardware MAC address  no-gratuitous-arp-reply  Don't enable gratuitous ARP reply  no-gratuitous-arp-request  Ignore gratuitous ARP request  no-traps             Don't enable SNMP notifications on state changes  speed                Link speed> traceoptions         Interface trace options  traps                Enable SNMP notifications on state changes> unit                 Logical interface  vlan-tagging         802.1Q VLAN tagging support[edit]root# set interfaces fxp0      a   unit 0 add                                 ^syntax error.root# set interfaces fxp0 unit 0 add   r                                 ^syntax error.root# set interfaces fxp0 unit 0 addr               ?Possible completions:              Execute this command  accounting-profile   Accounting profile name+ apply-groups         Groups from which to inherit configuration data  bandwidth            Logical unit bandwidth (informational only)  description          Text description of the interface  disable              Disable this logical interface  encapsulation        Logical link-layer encapsulation> family               Protocol family  no-traps             Don't enable SNMP notifications on state changes  passive-monitor-mode  Use interface to tap packets from another router  traps                Enable SNMP notifications on state changes  vlan-id              Virtual LAN identifier value for 802.1Q VLAN tags  |                    Pipe through a command[edit]root# set interfaces fxp0 unit 0       fm                                 ^syntax error.root# set interfaces fxp0 unit 0 fm                              f                           ^syntax error.root# set interfaces fxp0 f              unit 0 family i                                         ^'i' is ambiguous.Possible completions:> inet                 IPv4 parameters> inet6                IPv6 protocol parameters> iso                  OSI ISO protocol parameters[edit]root# set interfaces fxp0 unit 0 family i   netroot# set interfaces fxp0 unit 0 family inet   ?Possible completions:> inet                 IPv4 parameters> inet6                IPv6 protocol parameters[edit]root# set interfaces fxp0 unit 0 family inet    ?Possible completions:              Execute this command> address              Interface address/destination prefix+ apply-groups         Groups from which to inherit configuration data> filter               Packet filtering  no-redirects         Do not redirect traffic> policer              Interface policing  primary              Candidate for primary interface in system  |                    Pipe through a command[edit]root# set interfaces fxp0 unit 0 family inet    a                                              ^'a' is ambiguous.Possible completions:> address              Interface address/destination prefix+ apply-groups         Groups from which to inherit configuration data[edit]root# set interfaces fxp0 unit 0 family inet a   ddress ?Possible completions:               Interface address/destination prefix[edit]root# set interfaces fxp0 unit 0 family inet address    10.37.144.218/21 ?Possible completions:              Execute this command+ apply-groups         Groups from which to inherit configuration data> arp                  Static ARP entries  broadcast            Broadcast address  preferred            Preferred address on interface  primary              Candidate for primary address in system> vrrp-group           VRRP group  |                    Pipe through a command[edit]root# set interfaces fxp0 unit 0 family inet address 10.37.144.218/21    '                                                                      ^syntax error.[edit]root# root# set interfaces fxp0 unit 0 family inet address 10.37.144.218/21 '      [edit]root# commit Aug 11 21:58:52   dcd[2295]: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryAug 11 21:58:54   cosd[2310]: COSD_CONF_OPEN_FAILURE: Unable to open: /var/etc/cosd.conf, using default CoS forwarding classes, do 'commit full' in cli to avoid this messagefxp0: Multicast addr command failedfxp1: Multicast addr command failedAug 11 21:59:22   dcd[2295]: COSD_CONF_OPEN_FAILURE: Unable to open: /var/etc/cosd.conf, using default CoS forwarding classes, do 'commit full' in cli to avoid this messagecommit complete[edit]root# [edit]root# [edit]root# [edit]root# [edit]root# exit Exiting configuration moderoot> exit root@% ls.cshrc                .login                .profileroot@% sifconfigfxp0:        encaps: ether; framing: etherflags=0x3/0x8000         curr media: i802 0:8:c7:43:3c:3fxp0.0:        flags=0x8000         inet primary local=10.37.144.218 dest=10.37.144.0/21 bcast=10.37.151.255fxp1:        encaps: ether; framing: etherflags=0x13/0x8001         curr media: i802 8:0:9:dc:16:6lsi:        encaps: (null); framing: pseudoflags=0x3/0x8000 dsc:        encaps: (null); framing: pseudoflags=0x3/0x8000 lo0:        encaps: loopback; framing: localflags=0x103/0x8000 lo0.16383:        flags=0x8000         inettap:        encaps: other; framing: pseudoflags=0x3/0x8000 gre:        encaps: (null); framing: flags=0x3/0x8010 ipip:        encaps: (null); framing: flags=0x3/0x8000 pime:        encaps: (null); framing: flags=0x3/0x8000 pimd:        encaps: (null); framing: flags=0x3/0x8000 mtun:        encaps: (null); framing: flags=0x3/0x8000 root@%  Aug 11 21:59:35   init: ntp is thrashing, not restartedroot@% root@% ping 10.37.144.218PING 10.37.144.218 (10.37.144.218): 56 data bytes64 bytes from 10.37.144.218: icmp_seq=0 ttl=255 time=15.210 ms64 bytes from 10.37.144.218: icmp_seq=1 ttl=255 time=0.299 ms^C--- 10.37.144.218 ping statistics ---2 packets transmitted, 2 packets received, 0% packet lossround-trip min/avg/max/stddev = 0.299/7.755/15.210/7.456 msroot@% ping 10.37.144.21819PING 10.37.144.19 (10.37.144.19): 56 data bytes^C--- 10.37.144.19 ping statistics ---7 packets transmitted, 0 packets received, 100% packet lossroot@% show ishow: Command not found.root@% cliroot> show interfaces ?Possible completions:              Execute this command       Physical or logical interface  brief                Display brief version of interface information  controller           Show controller information  descriptions         Show interface description strings  destination-class    Show statistics for a specific destination class  detail               Display detailed version of information  dsc                    extensive            Display extensive information  filters              Show interface filters information  fxp0                   fxp0.0                 fxp1                   gre                    interval             Show interval statistics  ipip                   lo0                    lo0.16383              lsi                    mac-database         Display MAC Database information  media                Display media information  mtun                 ---(more 67%)---                      pimd                   pime                   policers             Show interface policers information  queue                Show queue statistics for this interface  routing              Display routing status  snmp-index           Show interface with this SNMP index  source-class         Show statistics for a specific source class  statistics           Display statistics and detailed information  tap                    terse                Display terse version of information  |                    Pipe through a commandroot> show interfaces    f                       ^'f' is ambiguous.Possible completions:       Physical or logical interface  filters              Show interface filters information  fxp0                   fxp0.0                 fxp1                 root> show interfaces f   xproot> show interfaces fxp   0 Physical interface: fxp0, Enabled, Physical link is Up  Interface index: 1, SNMP ifIndex: 1  Type: Ethernet, Link-level type: Ethernet, MTU: 1514, Speed: 100mbps  Device flags   : Present Running  Interface flags: SNMP-Traps  Link type      : Full-Duplex  Current address: 00:08:c7:43:3c:03, Hardware address: 00:08:c7:43:3c:03  Last flapped   : Never  Input packets : 0   Output packets: 0  Logical interface fxp0.0 (Index 66) (SNMP ifIndex 13)     Flags: SNMP-Traps Encapsulation: ENET2    Protocol inet, MTU: 1500      Flags: Is-Primary      Addresses, Flags: Is-Default Is-Preferred Is-Primary        Destination: 10.37.144/21, Local: 10.37.144.218,        Broadcast: 10.37.151.255root> root> show interfaces fxp0    ?Possible completions:              Execute this command  brief                Display brief version of interface information  descriptions         Show interface description strings  detail               Display detailed version of information  extensive            Display extensive information  media                Display media information  snmp-index           Show interface with this SNMP index  statistics           Display statistics and detailed information  terse                Display terse version of information  |                    Pipe through a commandroot> show interfaces fxp0    brief                   terse Interface               Admin Link Proto Local                 Remotefxp0                    up    up  fxp0.0                  up    up   inet  10.37.144.218/21root> root> show interfaces fxp0 terse    xp0 terse    1 terse Interface               Admin Link Proto Local                 Remotefxp1                    up    downroot> ping 10.37.144.254 PING 10.37.144.254 (10.37.144.254): 56 data bytes^C--- 10.37.144.254 ping statistics ---5 packets transmitted, 0 packets received, 100% packet lossroot> re        ^'re' is ambiguous.Possible completions:  request              Make system-level requests  restart              Restart a software processroot> re   quest system reboot Reboot the system ? [yes,no] (no) yes                                                                                *** FINAL System shutdown message from root@ ***                             System going down IMMEDIATELY                                                                                                                                                                                                                shutdown: [pid 2599]Shutdown NOW!root> Aug 11 22:01:12   rpd[2301]: RPD_SNMP_SARECV: snmp_epi_recv: error from sam_recv: 0 Waiting (max 60 seconds) for system process `bufdaemon' to stop...stoppedWaiting (max 60 seconds) for system process `syncer' to stop...stoppedsyncing disks... 3 2 doneUptime: 5m26sata0: resetting devices .. doneata0: Spinning down devices. Please wait...Rebooting...Console: serial portBIOS drive C: is disk0BIOS 639kB/261120kB available memoryFreeBSD/i386 bootstrap loader, Revision 0.8(builder@cecrops.juniper.net, Thu Jul 24 02:09:25 GMT 2003)|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/kernel text=0x33b247 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-data=0x273d8+0x49c88 \|/-\|/-\|/-\|/-\|/-\syms=[0x4+0x3bb90|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+0x4+0x46cb7-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|]                    Loader Quick Help                     ----------------- The boot order is PCMCIA or floppy -> Flash -> Disk -> Lan -> back to PCMCIA or floppy. Typing reboot from the command prompt will cycle through the boot devices. On some models, you can set the next boot device using the nextboot command: nextboot compact-flash | diskFor more information, use the help command: help   Hit [Enter] to boot immediately, or space bar for command prompt.Booting [kernel] in 9 seconds... Booting [kernel] in 8 seconds... Booting [kernel] in 7 seconds... Booting [kernel] in 6 seconds... Booting [kernel]...               /-\|/-\|Copyright ?1996-2001, Juniper Networks, Inc.All rights reserved.Copyright ?1992-2001 The FreeBSD Project.Copyright ?1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994        The Regents of the University of California. All rights reserved.JUNOS 6.0R1.3 #0: 2003-07-24 02:20:37 UTC    builder@cecrops.juniper.net:/build/cecrops-d/6.0R1.3/obj-i386/sys/compile/JUNIPERTimecounter "i8254"  frequency 1193182 HzTimecounter "TSC"  frequency 331706844 HzCPU: Pentium II/Pentium II Xeon/Celeron (331.71-MHz 686-class CPU)  Origin = "GenuineIntel"  Id = 0x660  Stepping = 0  Features=0x183f9ffreal memory  = 268435456 (262144K bytes)sio0: gdb debugging portavail memory = 255840256 (249844K bytes)Olive CPUPreloaded elf kernel "kernel" at 0xc0531000.DEVFS: ready for devicesPentium Pro MTRR support enabledmd0: Malloc disknpx0:  on motherboardnpx0: INT 16 interfacepcib0:  on motherboardpci0:  on pcib0pcib1:  at device 1.0 on pci0pci1:  on pcib1pci1:  at 0.0 irq 11fxp0:  port 0x2000-0x201f mem 0x40100000-0x401fffff,0x40300000-0x40300fff irq 11 at device 10.0 on pci0fxp1:  port 0x2020-0x203f mem 0x40200000-0x402fffff,0x40400000-0x40400fff irq 11 at device 14.0 on pci0isab0:  at device 20.0 on pci0isa0:  on isab0atapci0:  port 0x2060-0x206f at device 20.1 on pci0ata0: at 0x1f0 irq 14 on atapci0pci0:  at 20.2 irq 11smb0:  port 0xfc00-0xfc0f at device 20.3 on pci0fdc0:  at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0ata2 at port 0x170-0x177,0x376 irq 15 on isa0atkbdc0:  at port 0x60,0x64 on isa0atkbd0:  flags 0x1 irq 1 on atkbdc0psm0:  irq 12 on atkbdc0psm0: model 4D+ Mouse, device ID 8vga0:  at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0sc0:  at flags 0x100 on isa0sc0: VGA sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0sio0: type 16550A, consolesio1: configured irq 5 not in bitmap of probed irqs 0sio2 at port 0x2f8-0x2ff irq 3 on isa0sio2: type 16550Asio3: configured irq 7 not in bitmap of probed irqs 0fxp0: Ethernet address 00:08:c7:43:3c:03fxp1: Ethernet address 08:00:09:dc:16:06DEVFS: ready to runad0: 1549MB  [3148/16/63] at ata0-master using WDMA2Mounting root from ufs:/dev/ad0s1aMounted jbase package on /dev/vn0...Mounted jkernel package on /dev/vn1...Mounted jpfe package on /dev/vn2...Mounted jdocs package on /dev/vn3...Mounted jroute package on /dev/vn4...swapon: adding /dev/ad0s1b as swap deviceAutomatic reboot in progress.../dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1a: clean, 82933 free /dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1e: clean, 12114 free (53 frags, 10360 blocks, 0.0% fragmentation)(18 frags, 1512 blocks, 0.1% fragmentation)(53 frags, 10360 blocks, 0.0% fragmentation)/dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1f: clean, 947684 free (236 frags, 118431 blocks, 0.0% fragmentation)tunefs: soft updates setmgd: commit completeSetting initial options:  debugger_on_panic=NO debugger_on_break=NO.Doing initial network setup: hostname.Initial interface configuration:fxp0: Multicast addr command failedfxp1: Multicast addr command failedadditional daemons: syslogd.checking for core dump...savecore: Router rebooting after a normal shutdown....Additional routing options:.Doing additional network setup:.Starting final network daemons:.setting ldconfig path: /usr/libstarting standard daemons: cron.Initial rc.i386 initialization:.rc.i386 configuring syscons:.Local package initialization:.starting local daemons:.Wed Aug 11 22:04:21 GMT 2004Amnesiac (ttyd0)login: Aug 11 22:04:26 init: process_mode mode=BOTH cmd=adaptive-services master_mode=1Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: adminPassword:Login incorrectlogin: login: root--- JUNOS 6.0R1.3 built 2003-07-24 02:20:37 UTCTerminal type? [vt100] HHHHHHHHHclroot@% cliroot> root> root> root> root> show route inet.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)+ = Active Route, - = Last Active, * = Both10.37.144.0/21     *[Direct/0] 00:00:18                    > via fxp0.010.37.144.218/32   *[Local/0] 00:00:18                      Local via fxp0.0root> ping 10.37.144.12      2189    PING 10.37.144.218 (10.37.144.218): 56 data bytes64 bytes from 10.37.144.218: icmp_seq=0 ttl=255 time=15.169 ms64 bytes from 10.37.144.218: icmp_seq=1 ttl=255 time=0.326 ms^C--- 10.37.144.218 ping statistics ---2 packets transmitted, 2 packets received, 0% packet lossround-trip min/avg/max/stddev = 0.326/7.748/15.169/7.422 msroot> root> ping 10.37.144.218                254 PING 10.37.144.254 (10.37.144.254): 56 data bytes^C--- 10.37.144.254 ping statistics ---2 packets transmitted, 0 packets received, 100% packet lossroot> show arp root> show interfaces fxp                         ^'fxp' is ambiguous.Possible completions:       Physical or logical interface  fxp0                   fxp0.0                 fxp1                 root> show interfaces fxp   1 Physical interface: fxp1, Enabled, Physical link is Down  Interface index: 2, SNMP ifIndex: 2  Type: Ethernet, Link-level type: Ethernet, MTU: 1514, Speed: 10m  Device flags   : Present Running No-Carrier  Interface flags: Hardware-Down SNMP-Traps  Link type      : Half-Duplex  Current address: 08:00:09:dc:16:06, Hardware address: 08:00:09:dc:16:06  Last flapped   : Never  Input packets : 0   Output packets: 0root> root> show interfaces fxp1          0 Physical interface: fxp0, Enabled, Physical link is Up  Interface index: 1, SNMP ifIndex: 1  Type: Ethernet, Link-level type: Ethernet, MTU: 1514, Speed: 100mbps  Device flags   : Present Running  Interface flags: SNMP-Traps  Link type      : Full-Duplex  Current address: 00:08:c7:43:3c:03, Hardware address: 00:08:c7:43:3c:03  Last flapped   : Never  Input packets : 0   Output packets: 0  Logical interface fxp0.0 (Index 64) (SNMP ifIndex 13)     Flags: SNMP-Traps Encapsulation: ENET2    Protocol inet, MTU: 1500      Flags: Is-Primary      Addresses, Flags: Is-Default Is-Preferred Is-Primary        Destination: 10.37.144/21, Local: 10.37.144.218,        Broadcast: 10.37.151.255root> show interfaces terse Interface               Admin Link Proto Local                 Remotedsc                     up    up  fxp0                    up    up  fxp0.0                  up    up   inet  10.37.144.218/21fxp1                    up    up  gre                     up    up  ipip                    up    up  lo0                     up    up  lo0.16383               up    up   inet lsi                     up    up  mtun                    up    up  pimd                    up    up  pime                    up    up  tap                     up    up  root> root> show interfaces terse    Interface               Admin Link Proto Local                 Remotedsc                     up    up  fxp0                    up    up  fxp0.0                  up    up   inet  10.37.144.218/21fxp1                    up    up  gre                     up    up  ipip                    up    up  lo0                     up    up  lo0.16383               up    up   inet lsi                     up    up  mtun                    up    up  pimd                    up    up  pime                    up    up  tap                     up    up  root> show interfaces fx0   p0       1 terse Interface               Admin Link Proto Local                 Remotefxp1                    up    up  root> root> show interfaces fxp1 terse                            0 terse Interface               Admin Link Proto Local                 Remotefxp0                    up    up  fxp0.0                  up    up   inet  10.37.144.218/21root> exit root@% cd /varroot@% lsbin                db                log                tmpcrash                etc                run                transfercron                home                swroot@% cd etcroot@% lsalarmd.conf                issue                        passwdaprobed.conf                issue-                        pwd.dbbootpd.conf                keyadmin.conf                rc.conf.incchassisd.conf                keyadmin.conf-                rc.conf.inc-chassisd.conf-                kmd.conf                rc.ui.defaultscosd.conf                kmd.conf-                rc.ui.defaults.rawdcd.aps.conf                master.passwd                resolv.confdcd.irsd.conf                master.passwd-                resolv.conf-dcd.vrrp.conf                mgd.conf                spwd.dbfilters                        mgd.conf-                sshd_confgroup                        motd                        sshd_conf-group-                        newsyslog.conf                sslgtpcd.conf                newsyslog.conf-                ssl-gtpcd.conf-                ntp.conf                sysidshosts                        ntp.keys                sysids-hosts-                        ntp.keys-                syslog.confifinfo.conf                pam.conf                syslog.conf-ifinfo.conf-                pam.conf-                ttysinetd.conf                pam_radius.conf                ttys-inetd.conf-                pam_radius.conf-        vrrpd.confinit.inc                pam_tacplus.conf        vrrpd.conf-irsd_rtins.conf                pam_tacplus.conf-root@% cdcd ..root@% lsbin                db                log                tmpcrash                etc                run                transfercron                home                swroot@% cd /etcroot@% lsamd.map                        inetd.conf                rc.localauth.conf                init.conf                rc.networkcrontab                        login.access                rc.pccardcsh.cshrc                login.conf                rc.serialcsh.login                login.conf-                rc.uicsh.logout                login.conf.sys                remotedb                        master.passwd                resolv.confdcd.miniconffiles.conf        master.passwd.sys        rpcdefaults                modems                        securitydevfs                        motd                        servicesdisktab                        mtree                        shellsdumpd                        netstart                skeykeysexports                        networks                spwd.dbfbtab                        newsyslog.conf                sshfstab                        pam.conf                syslog.confftpusers                passwd                        termcapgettytab                profile                        termcap.smallgroup                        protocols                tnetd.confgroup.sys                pwd.db                        tnp.hostshost.conf                rc                        ttyshosts                        rc.conf                        ttys.syshosts.equiv                rc.i386root@% cd /varroot@% lsbin                db                log                tmpcrash                etc                run                transfercron                home                swroot@% cd /tmproot@% slsl: Command not found.root@% ls.clnpkg.LCK        .pkg.LCKroot@% cd /varroot@% lsbin                db                log                tmpcrash                etc                run                transfercron                home                swroot@% cd tmproot@% slsl: Command not found.root@% lschargingd_log_data.tmp                sampled.pktsjbundle-6.0R1.3-export.tgzroot@% cdlschargingd_log_data.tmp                sampled.pktsjbundle-6.0R1.3-export.tgzroot@% ifconfigfxp0:        encaps: ether; framing: etherflags=0x3/0x8000         curr media: i802 0:8:c7:43:3c:3fxp0.0:        flags=0x8000         inet primary local=10.37.144.218 dest=10.37.144.0/21 bcast=10.37.151.255fxp1:        encaps: ether; framing: etherflags=0x3/0x8000         curr media: i802 8:0:9:dc:16:6lsi:        encaps: (null); framing: pseudoflags=0x3/0x8000 dsc:        encaps: (null); framing: pseudoflags=0x3/0x8000 lo0:        encaps: loopback; framing: localflags=0x103/0x8000 lo0.16383:        flags=0x8000         inettap:        encaps: other; framing: pseudoflags=0x3/0x8000 gre:        encaps: (null); framing: flags=0x3/0x8010 ipip:        encaps: (null); framing: flags=0x3/0x8000 pime:        encaps: (null); framing: flags=0x3/0x8000 pimd:        encaps: (null); framing: flags=0x3/0x8000 mtun:        encaps: (null); framing: flags=0x3/0x8000 ifconfroot@% ifconfifconfigififconfig: Command not found.root@% ifconfigfxp0:        encaps: ether; framing: etherflags=0x3/0x8000         curr media: i802 0:8:c7:43:3c:3fxp0.0:        flags=0x8000         inet primary local=10.37.144.218 dest=10.37.144.0/21 bcast=10.37.151.255fxp1:        encaps: ether; framing: etherflags=0x3/0x8000         curr media: i802 8:0:9:dc:16:6lsi:        encaps: (null); framing: pseudoflags=0x3/0x8000 dsc:        encaps: (null); framing: pseudoflags=0x3/0x8000 lo0:        encaps: loopback; framing: localflags=0x103/0x8000 lo0.16383:        flags=0x8000         inettap:        encaps: other; framing: pseudoflags=0x3/0x8000 gre:        encaps: (null); framing: flags=0x3/0x8010 ipip:        encaps: (null); framing: flags=0x3/0x8000 pime:        encaps: (null); framing: flags=0x3/0x8000 pimd:        encaps: (null); framing: flags=0x3/0x8000 mtun:        encaps: (null); framing: flags=0x3/0x8000 ifconfigroot@% ifconfigfxp0:        encaps: ether; framing: etherflags=0x3/0x8000         curr media: i802 0:8:c7:43:3c:3fxp0.0:        flags=0x8000         inet primary local=10.37.144.218 dest=10.37.144.0/21 bcast=10.37.151.255fxp1:        encaps: ether; framing: etherflags=0x3/0x8000         curr media: i802 8:0:9:dc:16:6lsi:        encaps: (null); framing: pseudoflags=0x3/0x8000 dsc:        encaps: (null); framing: pseudoflags=0x3/0x8000 lo0:        encaps: loopback; framing: localflags=0x103/0x8000 lo0.16383:        flags=0x8000         inettap:        encaps: other; framing: pseudoflags=0x3/0x8000 gre:        encaps: (null); framing: flags=0x3/0x8010 ipip:        encaps: (null); framing: flags=0x3/0x8000 pime:        encaps: (null); framing: flags=0x3/0x8000 pimd:        encaps: (null); framing: flags=0x3/0x8000 mtun:        encaps: (null); framing: flags=0x3/0x8000 root@% pwd/var/tmproot@% lschargingd_log_data.tmp                sampled.pktsjbundle-6.0R1.3-export.tgzroot@% mount/dev/ad0s1a on / (ufs, local, noatime)devfs on dummy_mount (devfs, local)devfs on /dev/ (devfs, local, noatime, noexec, read-only)/dev/vn0 on /packages/mnt/jbase (cd9660, local, noatime, read-only)devfs on /dev/ (devfs, local, noatime, noexec, read-only)/dev/vn1 on /packages/mnt/jkernel-6.0R1.3 (cd9660, local, noatime, read-only)/dev/vn2 on /packages/mnt/jpfe-M40-6.0R1.3 (cd9660, local, noatime, read-only)/dev/vn3 on /packages/mnt/jdocs-6.0R1.3 (cd9660, local, noatime, read-only)/dev/vn4 on /packages/mnt/jroute-6.0R1.3 (cd9660, local, noatime, read-only)mfs:116 on /tmp (mfs, asynchronous, local, noatime)/dev/ad0s1e on /config (ufs, local, noatime)procfs on /proc (procfs, local, noatime)/dev/ad0s1f on /var (ufs, local, noatime, soft-updates)root@% ln -susage: ln [-fisv] file1 file2       ln [-fisv] file ... directory       link file1 file2root@% ifconfigfxp0:        encaps: ether; framing: etherflags=0x3/0x8000         curr media: i802 0:8:c7:43:3c:3fxp0.0:        flags=0x8000         inet primary local=10.37.144.218 dest=10.37.144.0/21 bcast=10.37.151.255fxp1:        encaps: ether; framing: etherflags=0x3/0x8000         curr media: i802 8:0:9:dc:16:6lsi:        encaps: (null); framing: pseudoflags=0x3/0x8000 dsc:        encaps: (null); framing: pseudoflags=0x3/0x8000 lo0:        encaps: loopback; framing: localflags=0x103/0x8000 lo0.16383:        flags=0x8000         inettap:        encaps: other; framing: pseudoflags=0x3/0x8000 gre:        encaps: (null); framing: flags=0x3/0x8010 ipip:        encaps: (null); framing: flags=0x3/0x8000 pime:        encaps: (null); framing: flags=0x3/0x8000 pimd:        encaps: (null); framing: flags=0x3/0x8000 mtun:        encaps: (null); framing: flags=0x3/0x8000 root@%  show intshow: Command not found.root@% cliroot> show interfaces terse Interface               Admin Link Proto Local                 Remotedsc                     up    up  fxp0                    up    up  fxp0.0                  up    up   inet  10.37.144.218/21fxp1                    up    up  gre                     up    up  ipip                    up    up  lo0                     up    up  lo0.16383               up    up   inet lsi                     up    up  mtun                    up    up  pimd                    up    up  pime                    up    up  tap                     up    up  root> configure Entering configuration mode[edit]root# ecit         dit fx0   p0           ^syntax error, expecting  or .[edit]root# edit interfaces fxp0 [edit interfaces fxp0]root# /   ?Possible completions:              Execute this command  activate             Remove the inactive tag from a statement  annotate             Annotate the statement with a comment  commit               Commit current set of changes  copy                 Copy a statement  deactivate           Add the inactive tag to a statement  delete               Delete a data element  edit                 Edit a sub-element  exit                 Exit from this level  help                 Provide help information  insert               Insert a new ordered data element  load                 Load configuration from an ASCII file  quit                 Quit from this level  rename               Rename a statement  run                  Run an operational-mode command  save                 Save configuration to an ASCII file  set                  Set a parameter  show                 Show a parameter  status               Display users currently editing the configuration  top                  Exit to top level of configuration  up                   Exit one level of configuration  wildcard             Wildcard operations---(more 100%)---                    [edit interfaces fxp0]root#     de        ^'de' is ambiguous.Possible completions:  deactivate           Add the inactive tag to a statement  delete               Delete a data element[edit interfaces fxp0]root# de   lete in               ^syntax error.root# delete in   t             ^syntax error.root# delete int         nt             ^syntax error.root# delete int                                  ls      ^unknown command.[edit interfaces fxp0]root# ifconfig      ^unknown command.[edit interfaces fxp0]root# exit [edit]root# set routing-options static route default nexthop 10.37.144.18 retainroot# ...tic route default nexthop 10.37.144.18 retain                       no-readvertise [edit]root# commit commit complete[edit]root# exit Exiting configuration moderoot> ping 10.37.144.19 PING 10.37.144.19 (10.37.144.19): 56 data bytes^C--- 10.37.144.19 ping statistics ---3 packets transmitted, 0 packets received, 100% packet lossroot> l   re        ^'re' is ambiguous.Possible completions:  request              Make system-level requests  restart              Restart a software processroot> re    quest system software add ?Possible completions:         URL or path of package  chargingd_log_data.tmp  Size: 0, Last changed: Aug 11 21:56:39  delay-restart        Do not restart daemons  force                Force package to be added (ignore warnings)  jbundle-6.0R1.3-export.tgz  Size: 39040014, Last changed: Aug 11 21:53:02  no-copy