关于多线路用ExpAuto脚本到期通知问题 求助

GMgm

关于ms大侠的ExpAuto脚本 真的很nb   很佩服 用着很不错 但是出现个问题 单线路到期可以到期提醒 但是对于多线pcc 失效  
请教论坛的大大们 怎么才能多线路也能正常使用  我总的12个铜板 谁帮我解决 送你10个  

47771885

建议 楼主 吧  /ip firewall mangle 贴出来
应该是 通知 部分没有放行所致。。。。ExpAuto 这个还是很强大的  呵呵。。。

guyang1201

看看不说话

GMgm

/ip firewall mangle
add action=add-src-to-address-list address-list=ExpAuto_allow \
    address-list-timeout=3h chain=prerouting comment=\
    "ExpAuto touch to allow list & Timeout" disabled=no dst-port=20189 \
    protocol=tcp src-address-list=ExpAuto_expired
add action=accept chain=prerouting comment="ExpAuto allow expired notice" \
    disabled=no dst-port=80 protocol=tcp src-address-list=ExpAuto_expired
add action=mark-connection chain=prerouting comment=pppoe1-con1 disabled=no \
    dst-address-type=!local new-connection-mark=pppoe-out1_conn passthrough=\
    yes per-connection-classifier=both-addresses:3/0 src-address=\
    11.11.11.0/24
add action=mark-connection chain=prerouting comment=pppoe1-con2 disabled=no \
    dst-address-type=!local new-connection-mark=pppoe-out1_conn passthrough=\
    yes per-connection-classifier=both-addresses:3/1 src-address=\
    11.11.11.0/24
add action=mark-connection chain=prerouting comment=wan2 disabled=no \
    dst-address-type=!local new-connection-mark=wan2_conn passthrough=yes \
    per-connection-classifier=both-addresses:3/2 src-address=11.11.11.0/24
add action=mark-routing chain=prerouting connection-mark=pppoe-out1_conn \
    disabled=no new-routing-mark=pppoe1rout passthrough=yes src-address=\
    11.11.11.0/24
add action=mark-routing chain=prerouting connection-mark=wan2_conn disabled=\
    no new-routing-mark=cncrout passthrough=yes src-address=11.11.11.0/24
add action=mark-connection chain=input disabled=yes in-interface=pppoe-out1 \
    new-connection-mark=pppoe-out1_conn passthrough=yes
add action=mark-routing chain=output connection-mark=pppoe-out1_conn \
    disabled=yes new-routing-mark=pppoe1rout passthrough=yes
add action=mark-connection chain=input disabled=yes in-interface=wan2 \
    new-connection-mark=wan2_conn passthrough=yes
add action=mark-routing chain=output connection-mark=wan2_conn disabled=yes \
    new-routing-mark=cncrout passthrough=yes

GMgm

还是不行啊

GMgm

还有这个脚本在5.16上面不能用了

hui21894558

如果用pcc均衡的话，把到期的用户的地址段被转向通知页面的时候，把所有流量固定到一条线就不会失效了，亲测。

hui21894558

src-address-list=ExpAuto_expired
这些用户全部mark connection 为cn
mark cn的用户全部mark routing=r1就可以了。