--------CL问题：

asky

我用2块8139D K6-2 266M CPU 做软路由

网卡驱动选择的是 8139too

启动没有报错的coyote,分别关掉adsl 和交换机的电源，屏幕会有显示。
eoth0 down (内网） eoth1 down（外网）
如果接通电源分别提示eoth0 UP


软件配置的是PPPOE ，DNS什么都没错

可是就是ping 不通啊！什么原因？急~~~~~~~

DreamCat

进入管理界面看看是否获取到了IP。

asky

QUOTE(DreamCat @ Jun 22 2005, 12:27 PM)
进入管理界面看看是否获取到了IP。
[right][snapback]52066[/snapback][/right]


ping 不通! 能进入管理界面？进不了！

henrt

Login后有简单的管理界面，你没用过？

asky

看看我的硬盘版具备哪些功能？都如何用？

已加载模块：
Module                  Size  Used by
8139too                11996   2
mii                     1868   0 [8139too]
ppp_async               5644   1
ppp_synctty             4256   0 (unused)
ppp_generic            13416   3 [ppp_async ppp_synctty]
slhc                    3924   0 [ppp_generic]
sch_ingress             1116   0 (unused)
sch_sfq                 2816   0 (unused)
sch_htb                16896   0 (unused)
cls_u32                 3960   0 (unused)
cls_fw                  2004   0 (unused)
ip_nat_quake3           1544   0 (unused)
ip_nat_mms              2352   0 (unused)
ip_nat_h323             2020   0 (unused)
ip_nat_amanda            708   0 (unused)
ip_nat_irc              1648   0 (unused)
ip_nat_ftp              2096   0 (unused)
ip_conntrack_quake3     1592   1
ip_conntrack_mms        2480   1
ip_conntrack_h323       1832   1
ip_conntrack_egg        2024   0 (unused)
ip_conntrack_amanda      968   1
ip_conntrack_irc        2344   1
ip_conntrack_ftp        3120   1
softdog                 1316   1

asky

内核启动信息：（是否存在什么问题？）

Linux version 2.4.30 (root@fedora) (gcc version 3.3.2 20031022 (Red Hat Linux 3.3.2-1)) #3 Mon May 9 21:30:31 BRT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000003000000 (usable)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
48MB LOWMEM available.
On node 0 totalpages: 12288
zone(0): 4096 pages.
zone(1): 8192 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: initrd=root.tgz initrd_dyn=minix ramdisk_size=4096 root=/dev/ram0 boot=/dev/hdc1,vfat BOOT_IMAGE=linux auto
Initializing CPU#0
Detected 132.634 MHz processor.
Console: mono EGA+ 80x25
Calibrating delay loop... 264.60 BogoMIPS
Memory: 46288k/49152k available (836k kernel code, 2476k reserved, 210k data, 76k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Intel Pentium with F0 0F bug - workaround enabled.
CPU:     After generic, caps: 000001bf 00000000 00000000 00000000
CPU:             Common caps: 000001bf 00000000 00000000 00000000
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfd97c, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: IBM-DALA-3540, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: attached ide-disk driver.
hdc: 1057392 sectors (541 MB) w/96KiB Cache, CHS=1049/16/63
Partition check:
hdc: hdc1
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
ip_conntrack version 2.1 (384 buckets, 3072 max) - 324 bytes per conntrack
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_tables: ?2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
INITRD: Compressed Tar archive found at block 0.
VFS: Mounted root (tmpfs filesystem). [ No Ceiling]
INITRD: Extracting TGZ archive[0]: |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done. [1187840 bytes]
VFS: Close: file count is 0
Freeing initrd memory: 620k freed
Freeing unused kernel memory: 76k freed
Software Watchdog Timer: 0.05, timer margin: 60 sec
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xc384a100, 00:e0:4c:50:74:28, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
eth1: RealTek RTL8139 at 0xc384c000, 00:e0:4c:d1:2d:82, IRQ 10
eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
eth1: link up, 10Mbps, half-duplex, lpa 0x0000

henrt

好像没啥问题。
Login进去，查看一下Log吧。。。

DreamCat

日志没问题，怎么看不到拨号验证过程？

asky

QUOTE(DreamCat @ Jun 26 2005, 12:50 PM)
日志没问题，怎么看不到拨号验证过程？
[right][snapback]52353[/snapback][/right]


看不到拨号验证过程？

可是使用很正常啊！

DreamCat

你不是说有问题么？汗~~

asky

QUOTE(DreamCat @ Jul 1 2005, 01:00 PM)
你不是说有问题么？汗~~
[right][snapback]52771[/snapback][/right]



你不是看LOG，是顺着我说呐？呵呵