| 
 | 
 
 楼主 |
发表于 2004-1-28 16:29:42
|
显示全部楼层
 
 
 
LR101 Features  
 
Kernel Version  2.4.22-LR101   
    
Internet Connection  
  
? Static IP   
? DHCP   
? PPPoE (PPP-over-Ethernet)   
? PPtP (Point-to-Point Tunnelling Protocol)   
? ISDN (Euro DSS1, 1TR6, US)   
  
    
Routing  
  
? Standard TCP/IP Routing   
? TCP/IP Policy Routing   
? IP/GRE Tunnelling   
? IP/IP Tunnelling   
? BGP Routing (with Zebra enabled)   
? OSPF Routing (with Zebra enabled)   
  
    
Firewall  
  
? IP-Tables/Netfilter v1.2.9   
? 15 Pre-Defined Rules for configuration interface   
? Automatic Basic-Rule creation (depending on your Internet-Connection)   
? Possibility to add default rules without knowledge of iptables syntax   
? Possibility to add really complex rules into a automatic loaded file after start-up   
? SourceNAT, DestinationNAT, Masquerading   
? Automatic application of the Dyn-IP Kernel-Patch   
  
    
IPSec VPN  
  
? SuperFreeS/WAN 1.99.8 (2.4.x Kernels)   
? Configurable through LRCONFIG   
? Dynamic Restart of IPSec if Internet-Connection goes down   
? 3DES Encryption of all ipsec-tunnells   
? PSK Authentication  
  
Manually configuration :   
? RSA Key authentication   
? X.509 certification auth.   
? additional (concurrent) VPNs   
? special configuration parameters (i.e. ike lifetime, etc.)   
  
    
LR101 ISP/VPN Failover  
  
? Configurable through LRCONFIG   
? Connection will be tested at least once a minute (manually changeable)   
? Configurable Failover-Interface (ISDN) or Failover-Gateway   
? Configurable if IPSec should be restarted after the Internet-Connection is broken   
? Definition of your connection type if a failover interface is configured (internet/private lan)   
  
    
Logging  
  
? Local SYSLOG Daemon   
? Remote logging with SYSLOG - configurable through LRCONFIG   
? Local logs (/var/log/messages) deletion in a 30 minute interval   
  
    
Administartion / Interface  
  
? Remote Administartion with SSH Client (only from internal network or a tunnelled network)   
? Local Administration directly onto the console   
? All neccessary configuration can be done via the "LRCONFIG" tool |   
 
 
 
 |